Posts Tagged ‘Terrain’

I have been playing Bolt Action for some time now and it was
about time I sorted some half decent terrain out.

The aim was produce six terrain boards and ensure everything was
easy to set up and put away with the minimum of fuss. The ability
to stack everything away in a small space was also a high priority.

The boards were extremely simple (2 x 2 feet) and made from a wooden
frame with an mdf base. A styrene block was inserted into the recess and
sealed with masonry paint. I even managed to recycle some old Flames Of
War boards into the process. Each board was given a basic flock coating
and a road textured with sand was added.

I then created a typical Normandy walled farm complex that can be easily
removed and put away in a box. The superb buildings are from Ham and Jam
and come pre painted at a crazy low price. The price is even lower if
you buy in bulk at a wargaming show.
All the building have been modified slightly by me, so foliage added, weathering,
metal building braces, interior painting, interior scatter, interior flooring,
interior ladders and external telegraph points.

I have also created a few items to add to the Normandy theme. So we have green
house, cider press, milk churns, a rusting bike, hay bales, telegraph poles and wires,
road signs and adverts, flower planters and water troughs, a well, a cart and anything
else you can spot. I also created plenty of trees, bushes, hedges, walls and a road block
if needed.

Advertisements

 

I needed some more scenery for my Bolt Action boards and

noticed there is a lot of farm equipment made by Britains that

would nicely do the job on fleabay. Its 1:32 scale according to

the official guide but I think a lot of the Britains stuff fits in

quiet nicely if your not to particular.

You get a white plastic kit in sections for £10 and not much else.I

managed to get a grass roller thrown in as well(it all helps).

I assembled the greenhouse and added some wooden boards for

plants made from balsa wood and added a stone paving effect

path inside.

I then based the greenhouse on plasticard and added various bits

inside giving the look of a discarded neglect. The rusty roller went inside

along with some Noch plant pots and various odds and ends. I also

added an out of control creeper escaping through the roof.

The glass is clear plasticard with a green wash to represent mould and

decay.

And goodnight from the greenhouse.

Built from scratch and meant to fit into a Normandy WWII

terrain landscape..

I went for the disused ,overgrown and neglected look in

the end. I like the idea of it sitting in one corner of the farm

slowly rotting like the apples, awaiting better days.

Perhaps a pile of rotting apples next to it might be the next

bit of scratch built terrain ?

In an attempt to get started on my Bolt Action terrain

boards I am getting stuck into the fine detail. I wanted

something extra and typical in a Normandy farm yard,

thus the cider press.

Normandy is covered in apple orchards and is famous

for its drinks made from apple juice. These include,

Cidre(Cider) apple wine fermented from apple juice,

Calvados(apple brandy) distilled dry fermented cider

which is then aged in oak barrels, Pommeau(aperitif)

unfermented apple juice and apple brandy aged in oak

barrels and finally Benedictine(herbal liquer) a mixture

of plants and spices distilled in oak barrels.

All these were made on an industrial scale and more

importantly a very local scale. If you had century old

apple or even pear orchards on your land then all

you had to do was build a rustic apple press from

spare timber and let the happy times begin.

My simple press is meant to look as rustic as

possible and simply works by dropping apples

into the wooden barrel usually within a muslin

or cloth wrap. The long pole will be attached to

the top and would have been turned forcing a simple

wooden block board down squashing the apples. The

pomace(juice) runs out via a funnel/pipe at the bottom.

Obviously at the moment its not complete and requires

some legs and painting. If your wondering what the silver

bands  are around  the barrel,they are artist foil.

I will post up the finished product soon perhaps with a

scratch built apple run as well.

Oh I have also been making some Cidre bill boards to

advertise on the road side.

Below is a typical Normandy cidre press found

on every farm.

Don’t hide your miniatures and models away in boxes ,showcase them.”

This was the quote on ebay that sold me. £11.99 and £2.82 postage gets you a

customisable display board for your miniatures. Its made of laser cut MDF and

comes with a display piece ,a rear piece and frame.It holds up to 18 figures for

25mm and 32mm bases depending on your choice.

All you have to is decorate it to your choice. I decided on a grassy background to

blend in with my British Bolt Action Troops ,but its totally up to you what

you cover it in.

Basically ideal for displaying figures ,transporting figures, photographing figures

and selling them(I saw two people at the Newbury Colours show using these bases

to display merchandise).

Windmill1

Ok its finally finished.

I ended up going for a simple plasticard base and just

basic vegetation. If the base had been any bigger it would

of limited the amount of places I could of used it on a terrain

board.

So to sum it all up. Due to lack of 15mm windmills on the market

in the Normandy style, I decided to scratch build one. The tower is

made from plastic tube and has modelling clay on the outside giving

the stone effect. The top of the windmill is styrene with modelling clay

on the outside giving the tile effect. I also used balsa wood to make the

sail connection.

The sails are borrowed from another 15mm manufacturer of windmills and I used

an iron rod to connect the sails to windmill. Thus the sails actually turn and

are not fixed in place. The door on the windmill is balsa wood and the windows

are pinched from an “N”guage model railway building.

I tried to go for the overall look of recently abandoned.

Anyway it was lots of fun making it and hope you like it.

Windmill2

Windmill3

IMG_0871a

Things are on the move finally. I finished the top

which is styrene covered in modelling clay. I also managed

to get the connection between the sail and mill sorted

which took an eternity to get just right.

Its presently had a few starter coats of paints on it and I am

about to base it on something a bit bigger. The basing will

help it stand up and keep it safe from big clumsy hands like

mine.

More soon.

IMG_0873a

Untitled-1

I have been wanting a windmill to sit on

my terrain boards for ages and fed up with the

lack of ready made terrain to do the job I

decided to have a go at building one myself.

So here is the plan. First,I cut off a small

length of black plastic drainpipe tube. After much

thinking I decided to achieve the stone effect with

DAS modelling clay as it gave me the ability to get

exactly what I was after. Its simply moulded around

the drainpipe and I used a small knife to mark out

the stone relief, windows and door.

Next up I need to create a roof, build some door and

window frames plus add lots of paint. I have found a

windmill sail from a bargain bucket which can be adapted

to the correct type. This should help speed things up.

Below is the DAS modelling clay after sculpting.

IMG_0769

Only got to wait 3 days now for it to dry lol.

Been playing with hedges again and having lots of fun in the process.

My hedge is made from fish tank filter, wire and sea foam. There are also

a few other bits added for fine detail.

I have also been painting up a huge amount of German armour so seems ideal

to combine the two.

First up the hedge with vehicles hiding behind it :

Click on any picture to enlarge

Hedge2

The vehicles:

Hedge4

Hedge3

Hedge5

Hedge7

Hedge8

Hedge6

The proof those vehicles really were behind the hedge:

Hedge1

Finally another hedge close up :

Hedge10

Its no bocage hedge ,but more of a normal type.

Thanks for looking.

Flak1

Some things take an age to complete and this is

a prime example. Its been in a box for over year

and I felt it was time to clear the backlog. Its

made by Cama models and the flak gun sitting in

the middle is a Forged In Battle 2cm Flak Vierling.

I scratch built the raised platform for the flak gun

to sit on(which was a common thing in real life) and

added a base for it all to sit on. There are a few other

scratch built bits on it as well.

Flak2

Flak3

Flak4

Flak5

Once again you could use it as an object marker or just

more terrain.