Project : Normandy Terrain boards stage 1

Posted: July 23, 2014 in 15mm, Flames Of War, Project, Scratch Built, Terrain, WW2
Tags: , , , , , , , , ,

I have been making small bits of terrain for some time and recently

a lot of Western front WW2 type stuff. Unfortunately I have an

Eastern front type terrain board which has been disguised , very

badly as of late to look like Normandy 😦

So without a further thought of what I`m letting myself in for

and inspired by Arkiegamer ,its off to the shed and out with

power tools 🙂

Now I started this project a couple of months back and to be honest

I have been up to other things but in an attempt to get myself moving

its time to post up my progress and get on with it.

Stage one was to build the standard boards which I already use. By

keeping to the same sizes they will fit perfectly in my terrain storage

tower(sounds impressive but wait for the picture).

IMG_6946a

My terrain boards are 610 x 610 in size, which fit nicely on most tables

and are not to bulky to move around as a permanent set up board is out

of the question.

I basically cut out four battens of strip wood(2cm x 2cm) and sand off any rough

edges.
IMG_6192a

These are then glued down onto a 6mm MDF board using industrial PVA

glue.
IMG_6191a

IMG_6203a

Once dry a couple of small screws are screwed through the MDF from underneath

the board into the battens to add to rigidity.

Next up I use styrene boards which just happen to be the exact height of

the battens. Cut out the desired shape with a saw(best tool for cutting large

bits of styrene neatly) and glue down again

with industrial PVA, use plenty. Please note by industrial PVA glue I mean the

stuff builders use for sticking just about anything . You can also use wood glue for

sticking down the wood if you choose.

IMG_6202a

IMG_6200a

Now we have the basic battle board all ready for whatever you plan to do.

For my project I made four of these basic boards.

Just as a note in case any body is interested, this is what the basic costs

are but a large amount of the stuff I already had in stock. The prices quoted

make at least four boards.

1. 6mm sheets of MDF x 2 £10.
2. 2×2 lengths of strip wood x 2 £12.
3. PVA glue big pot £8.
4. Styrene in packs of 5 £14.
5. Small screw pack £3.

So £47 so far or $80 dollars for you guys over the pond 🙂

Compared to GW boards x 6 at £170 or $289 and I will have lots

of kit left over for more boards.

Advertisements
Comments
  1. arkiegamer says:

    This is exciting! I love terrain boards-I wish I had the room to store them. Looking forward to following your progress and stealing any/all good ideas you come up with. 🙂

  2. Scratchbuilt stuff, when done well, works quite nicely in terms of costs. This is very nice work!

  3. pwbinde says:

    I look forward to following your progress.

  4. […] stuff for the historical wargamer. Check out his excellent tutorial on how to make a very spiffy Normandy gaming table. He also excels in painting FoW 15mm […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s